Pressure Solutions

Lower costs and expand pressure measurement capabilities with new, versatile pressure measurement equipment

Advanced pressure gauges are able to accurately return all types of pressure measurements, from rugged environments on drilling rigs to low-static-pressure environments, where the measurements need to be smaller and more precise. With features such as attached digital displays and multi-sensing transmitters, we have solutions you need for complex pressure measurements in tough conditions.

Absolute pressure transmitters are ideal for use in applications where the measurement will not be affected by atmospheric pressure. These transmitters compare a pressure relative to absolute (zero) pressure. The measurement output is always positive.

EJA310E

The EJA310E is a traditional-mount absolute pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJA310E outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics.

EJA510E

The EJA510E is an in-line mount absolute pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJA510E outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics.

EJX310A

The EJX310A is a traditional-mount absolute pressure transmitter and is part of the EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJX310A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, and diagnostics.

EJX510A

The EJX510A is an in-line mount absolute pressure transmitter with remote diaphragm seals and is part of the EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJX510A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, diagnostics, and optional status output for pressure high/low alarm.

EJX610A

The EJX610A is a high performance, in-line mount absolute pressure transmitter and is part of the EJX-A series. feature single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam pressure. The EJX610A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, diagnostics, and optional status output for pressure high/low alarm.

Differential pressure transmitters are used to measure the flow rate of liquid, gas or steam that have non-variable pressures and temperatures. These type of transmitters compare two pressures and transmit the difference to a control unit.

EJA110E

The EJA110E is a standard traditional-mount differential pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJA110E outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.

EJA118E

The EJA118E is a differential pressure transmitter with remote diaphragm seals and is part of the most recent evolution of the DPharp family, the EJA-E series. They can be used to measure liquid, gas, or steam flow, as well as liquid level, density, and pressure. EJA118E outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.

EJA130E

The EJA130E is a traditional mount, high static differential pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJA130E outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.

EJX110A

The EJX110A is a traditional-mount differential pressure transmitter and is part of the EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.

EJX118A

The EJX118A is a differential pressure transmitter with remote diaphragm seals and is part of the EJX-A series. They can be used to measure liquid, gas, or steam flow, as well as liquid level, density, and pressure. EJX118A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications

EJX130A

The EJX130A is a traditional-mount, high static differential pressure transmitter and is part of the EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX130A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.

Digital pressure gauges use pressure transducers to provide a reliable, high accuracy reading on an attached digital display. The display takes the signal from the transducer and processes it according to your settings to give you a pressure reading in the unit of your choosing.

PG5 General Purpose Digital Pressure Gauge

The PG5 is a digital pressure gauge for indoor use that features a large, full 5-digit display with 0.4 inch characters. It has an available range from vacuum up to 10,000 psi. Tare, peak hold, and max/min functions are standard and it offers a ±0.25% accuracy of full scale.

IP65 Digital Pressure Gauge

The series PG2 IP65 Digital Pressure Gauge measures gas and liquid pressure with high accuracy at an affordable price. As our basic digital pressure gauge, the PG2 has a weatherproof case, 304L stainless steel wetted material that is compatible with many liquids and gases, and comes with easy to use features and a large 5-digit display.

IP65 Digital Pressure Gauge with 5.5″ Display

With a large, 5-digit display, 0.68 in. characters and a 270° radial bar graph, the series PG10 IP65 pressure gauge gives you true at-a-glance readability. It has an available range from vacuum up to 10,000 psi. Tare, peak hold, min/max and data logging functions are standard and it offers ±0.25% accuracy of full scale. The PG10 IP65 also has the longest battery life of all other digital pressure gauges.

IP67 Digital Pressure Gauges with 0.25% Accuracy

The series PG7 IP67 digital pressure gauge is a robust digital gauge specifically designed from harsh environments.  Tare, peak hold, min/max and data logging functions are standard and it offers ±0.25% accuracy of full scale. It is built for either indoor or outdoor use and features an IP67 rating and long battery life.

Draft pressure transmitters are a unique type of differential transmitter, designed to measure the small differences in very low static pressure environments.

EJA120E

The EJA120E is a traditional-mount draft range pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJA120E outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Other key features include quick response, remote set-up using communications and self-diagnostics.

EJX120A

The EJX120A is a traditional-mount draft range pressure transmitter and is part EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX120A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Other key features include quick response, remote set-up using communications, diagnostics and optional status output for pressure high/low alarm.

Our field wireless solutions allow for process measurements that were previously too difficult or uneconomical to implement. We offer a complete line of ISA100 compliant pressure transmitters including transmitters that can measure differential pressure, absolute pressure and gauge pressure with a variety of different process connections.

EJX110B

The EJX110B is a high performance, wireless differential pressure transmitter that features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure as well as liquid level, density, and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

EJX118B

The EJX118B is a wireless diaphragm sealed differential pressure transmitter that can be used to measure liquid, gas or steam pressure as well as liquid level, density and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

EJX210B

The EJX210B is a high performance, wireless flange mounted differential pressure transmitter that features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure as well as liquid level, density, and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

EJX510B/EJX530B

The EJX510B/EJX530B are high performance, wireless absolute and gauge pressure transmitters that feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam pressure as well as liquid level, density, and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

Gauge pressure transmitters are used to measure the pressures of liquid, gas and steam. These transmitters produce a measurement by comparing a pressure relative to atmospheric pressure.

EJA430E

The EJA430E is a traditional-mount gauge pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJA430E outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics.

EJA438E

The EJA438E is a gauge pressure transmitter featuring remote diaphragm seals and is part of the most recent evolution of the DPharp family, the EJA-E series. It can be used to measure liquid, gas, or steam pressure. EJA438E outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics.

EJA440E

The EJA440E is a traditional-mount, high gauge pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJA440E outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics

EJA530E

The EJA530E is an in-line mount gauge pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJA530E outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics.

EJX430A

The EJX430A is a traditional-mount gauge pressure transmitter and is part of the EJX-A series.  It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJX430A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, and diagnostics.

EJX438A

The EJX438A is a gauge pressure transmitter featuring remote diaphragm seals and is part of the EJX-A series. It can be used to measure liquid, gas, or steam pressure. EJX438A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, and diagnostics and optional status output for pressure high/low alarm.

EJX440A

The EJX440A is a traditional-mount, high gauge pressure transmitter and is part of the EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJX440A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, and diagnostics

EJX530A

The EJX530A is an in-line gauge pressure transmitter and is part of the EJX-A series. feature single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam pressure. The EJX530A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, diagnostics, and optional status output for pressure high/low alarm.

EJX630A

The EJX630A is a high performance, in-line mount gauge pressure transmitter and is part of the EJX-A series. It features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure. The EJX630A outputs a 4 to 20 mA DC signal corresponding to the measured pressure. They also feature quick response, remote setup and monitoring via BRAIN or HART communications, diagnostics, and optional status output for pressure high/low alarm.

Hammer union pressure transducers use piezoresistive principles to monitor pressure on a diaphragm. They are specifically constructed to handle the shock, vibration, weather, and rough handling that prevails on a drilling or production rig.

1502 Hammer Union Pressure Transmitter

The 1502 hammer union pressure transmitter is designed for the rugged environments of land based and offshore drilling installations including mud logging and measurement while drilling. They are built to withstand extreme pressure, high vibration, and rough handling.

2202 Hammer Union Pressure Transmitter

The 2202 Hammer Union Pressure transmitter offers the same durability as the 1502, but in a smaller size. It is built for the most punishing conditions and is ideal for use in high vibration and shock applications

Our low-flow pressure transmitters combine a DP transmitter and an Integral Flow Orifice (IFO) into one unit, producing a total system that measures low flow accurately. Using Bernoulli’s equation, these transmitters can measure the flow of a fluid through a pipe.

EJA115E

The EJA115E is a low flow differential pressure transmitter and is part of the most recent evolution of the DPharp family, the EJA-E series. It is assembled with an integral flow orifice, making it excellent for very low flow measurement. It outputs a 4 to 20 mA DC signal corresponding to the measured flow. Its accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications

EJX115A

The EJX115A is a low flow differential pressure transmitter and is part of the EJX-A series. It is assembled with an integral flow orifice, making it excellent for very low flow measurement. It outputs a 4 to 20 mA DC signal corresponding to the measured flow. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.

A multi-variable transmitter combines a differential pressure transmitter, a gauge pressure transmitter, a temperature transmitter and a flow computer into one unit. The flow computer is programmed with application information and uses the three measured inputs to calculate the mass flow.

EJX910A

The EJX910A multivariable transmitter precisely measures differential pressure, static pressure and process temperature. It then uses these values in a high performance, on-board flow compute to deliver fully compensated mass flow.

EJX930A

The EJX930A multivariable transmitter is designed specifically for high static pressure applications and precisely measures differential pressure, static pressure and process temperature. It then uses these values in a high performance, on-board flow compute to deliver fully compensated mass flow.

A multi-sensing transmitter combines a differential pressure transmitter, gauge pressure transmitters, and temperature transmitter into one field instrument. An option for RS485 Modbus communication is available, allowing for easy integration with other devices.

EJX910A

The EJX910A is a multivariable transmitter and is part of the EJX-A series. It features multi-sensing technology with a single-crystal silicon resonant sensor that outputs the measured differential pressure, static pressure and process temperature, which covers multiple protocols including HART, FOUNDATION fieldbus and RS485 Modbus.

EJX930A

The EJX930A is a multivariable transmitter and is part of the EJX-A series. It is designed specifically for high static pressure applications features multi-sensing technology with a single-crystal silicon resonant sensor that outputs the measured differential pressure, static pressure and process temperature, which covers multiple protocols including HART, FOUNDATION fieldbus and RS485 Modbus.

Pressure transducers are used in both process and storage environments. Our solutions are built for industrial applications in pressure ranges up to 10,000 psi, and are suitable for both liquids and gasses. They are designed to provide accurate measurements and a long life expectancy at a low cost.

0% Industrial Pressure Transducer

Series PT-200 1% Industrial Pressure Transmitters are rugged, general purpose sensors that offer reliable and accurate measurements under harsh conditions. The sensor fitting is machined from a solid piece of 17-4 SS to provide stable operation when subjected to shock and vibration. PT-200 also incorporate digital compensation and temperature correction for high accuracy and stability.

Industrial Pressure Transducer

The PT-L1/L3/L10 series is a collection of simple pressure transducers with an amplified output. These pressure transducers are inexpensive, rugged and compact, making them ideal for a wide variety of application.

Intrinsically Safe Pressure Transducer

The PT-400 offers high accuracy and reliability over a wide range of pressures. The small size, integrated electronics, wide operating temperature range, ATEX and IECEx approval, and durability, make the PT-400 the perfect instrument for static and dynamic pressure measurements with an amplified output signal.

Millivolt-per-Volt Output Pressure Transducer

Our millivolt output transducers are the economical answer for all general purpose measurements where a cost-effective, high reliability unit is required. The PT-L9/L13/L14 pressure transducers offer ranges from vacuum to 10,000 psi, single piece stainless steel construction, and a tamper-resistant body design.

Submersible pressure transducers are incredibly versatile and inexpensive. They can measure the level of just about any liquid within their temperature range. They are often used in waste liquids where the exact chemical makeup is ill defined and are also becoming popular for battery powered applications because of their low current draw.

Submersible Pressure Transducer For Clean Liquids

The PT-500 submersible pressure transmitters are the only one on the market with built-in lighting protection, Class 1, Div. 1 certification, and a field-adjustable zero.

Submersible Pressure Transmitter For Dirty Liquids

The PT-500 is designed for reliability in waste water and other dirty or turbulent liquids. Its unique set of features including built-in lightning protection, Class 1, Div. 1/Zone 0 certification, choice of patented re-usable cage or fixed, welded cage, field adjustable zero, conduit mounting threads and ingenious and compact vent tube filter cap.

INSTRUMENTATION AND ANALYTICAL SOLUTIONS, SERVICE AND TRAINING