Temperature sensors and transmitters feature significant advances over their direct wired counterparts. Eliminate special cabling requirements and simplify engineering and maintenance while enabling advanced diagnostics. Wireless temperature solutions make measurement easier and more economical.
Our field wireless solutions allow for process measurements that were previously too difficult or uneconomical to implement. We offer a variety of temperature transmitters that can easily be integrated into any ISA100 compliant network.
The YTA510 is a high performance, dual-input temperature transmitter that accepts thermocouple, RTD, ohms or DC mill volt inputs. These transmitters transmit process variables and the setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The wireless communication is compliant with ISA100.11a protocol specifications. It also offers an ultra-low current consumption design, providing wireless operation for years with long life battery.
The YTMX580 is a multi-input temperature transmitter that can accept inputs from up to 8 points of measurement including thermoncouple, RTD, DC voltage, resistance and 4 to 20 mA DC. These transmitters convert the corresponding measurement inputs via a wireless signal and can also wirelessly send and receive setting parameters. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The wireless communication is compliant with ISA100.11a protocol specifications.
Flexible RTD and thermocouple temperature sensors replace restrictive and straight sensor probes with a universal sensing strategy that will save time and money.
The WORM® temperature sensor allows you to replace restrictive, straight sensor probles. Ideal for hockey-puck, connection head and dual-sided enclosures, this flexible sensor can bend right through the top or face of the enclosure. It slides through the enclosure’s conduit port, and into (or out of) the thermowell without having to remove the enclosure or any assembly components.
Why shop around for pieces and parts? Our easy-to-order temperature transmitters arrive tested, calibrated, and ready to install. Very affordably priced, these temperature transmitters feature our user-friendly and universal temperature transmitters perfectly matched to the RTD or thermocouple temperature sensor, thermowell and fittings you use most.
The RTI-1 is a ready to install sensor, temperature transmitter and thermowell assembly. Our easy to order assemblies arrive tested, calibrated and ready to install.
The RTI-2 is a ready to install sensor, temperature transmitter and thermowell assembly with display. Our easy to order assemblies arrive tested, calibrated and ready to install.
The RTI-3 is a ready to install sensor, temperature transmitter and thermowell assembly for surface measurements. This assembly supports our flexible tempearture sensor, the WORM® , and can mount directly to tanks, pipes, motors, compressors, valves, reactors, wells or anywhere else a temperature measurement is needed, eliminating errors caused by influences external to the process.
The RTI-4 is a ready to install flexible sensor temperature assembly. These versatile temperature assemblies mount directly to reactors, wells or anywhere a temperature measurement is needed, and eliminates errors caused by influences external to the process. Precise engineering and solid, sturdy construction allow these assemblies to endure the harshest plant conditions and field environments.
Our remote I/O temperature solutions help reduce the costs associated with transmitting multiple temperature sensor measurements in general purpose and hazardous area applications.
The NET Concentrator System (NCS) is the ideal solution when you need to network new and existing “legacy” process sensors, instruments and final control elements with computer based monitoring and control systems. Universal and modular, it programs to handle a wide range of signal input and control output possibilities.
The TCS Temperature Concentrator System substantially reduces the cost of transmitting multiple temperature sensor measurements in general purpose and hazardous area applications by “concentrating” up to 32 signals onto one network.
Temperature sensors and transmitters feature significant advantages over the directly wired counterparts by eliminating the need for special cabling requirements, simplifying engineering and maintenance while also enabling advanced diagnostics. We offer a variety of different mounting options to satisfy a wide array of temperature applications.
The STZ is a Functional Safety, Dual Input, Smart HART® temperature transmitter that can configure quickly and easily to accept a wide array of sensor and analog devices. These 2-wire transmitters provide an isolated and linear 4-20mA output proportional to the input. The signal is ready for direct interface with HART or non-HART based Safety System, DCS, PLC and other computer0based SCADA systems. Mounting choices include field enclosures, compact connection heads and a high-density, DIN-style housing.
The THZ3 and TDZ3 are dependable and accurate Smart HART® temperature transmitters with dual input sensors that simplify your operations. Their advanced features give you far more control over your temperature measurements. Each sensor is individually selectable and programmable HART or DTM. Mounting choices include field enclosures, compact connection heads and a high-density DIN-style housing.
The YTA50 is a head or DIN rail mount temperature transmitter with a single input. The single input accepts thermocouples, RTD, Ohms or a DC millivolt source. All inputs are linearized and converted in to an industrial standard 4 to 20 mA DC output for transmission to your system. YTA50 is the choice for your monitoring applications.
The YTA70 delivers all the benefits found in the YTA50 while adding HART digital protocol communication. The HART protocol allows you to conveniently configure the transmitter using the latest FDT/DTM technology. The YTA70 is the choice for all your control applications.
The YTA70P delivers the characteristics of both converters and transmitters. It has a space-saving design that offers low cost installation. The HART 7 protocol allows you to conveniently configure the transmitter using the latest FDT/DTM technology. HART 7 benefits include long tag, enhanced burst mode, and event notification. The YTA70P is the choice for rail-mounted control applications.
The YTA110/310 is a field-mount temperature transmitter that accepts a single sensor input and YTA320 is a dual input. This input can be from a RTD, thermocouple, ohm, or DC millivolt. These models support either BRAIN or HART 5 digital communication protocol. Dual input functions include Failed Sensor Backup, Temperature Averaging, and Differential Temperature. The YTA320 also adds the availability of FOUNDATION Fieldbus all digital communication.